Call Now: (866) 928-6611

The Best Water Heater Service in Hardin County, TX

Enter Your Zip Code for Pricing

Water Heaters in Hardin County

Lowest Cost Hardin County Water Heater Repair & Installation

Aptera's professional, experienced pros can tackle any issue with your water heater in Hardin County with quick repairs or replacement units. When your water goes cold, you see discolored water from the tap or hear clanking sounds from your heater, our experts are ready with same day water heater repair in Hardin County for both businesses and homeowners. Get started now or read below to see what it takes to become an Aptera partner and learn more.

At one point or another, burned out elements, sediment buildup, faulty thermostats, defective thermocouple, blocked vents, dip tube damage or a broken pressure relief valve will have you calling a repairman. Proper care, maintenance and selecting the right unit for your property all help reduce these occurrences. Aptera phone screened professionals are trained for every type of repair needed for all major brands and are ready 7 days a week.

Call Now for Pricing

Comparing Types of Water Heaters in Lumberton, Silsbee and Village Mills, TX

Recent changes in the National Appliance Energy Conservation Act have increased the energy efficiency standards for residential water heating with gas, oil or electricity—meaning new water heaters will produce hot water using fewer resources. In addition to improvements made to models with conventional water storage tanks, consumers also have solar-powered, tankless, and combination space heater/water heater models to consider.

Conventional Storage Tank Water Heaters

Conventional water heaters act as a holding tank for heated water. Cold water flows into the tank and is heated by the fuel source (usually gas or electric). The water sits in the tank where it is monitored by a thermostat and kept hot until there is a call for it from a connected tap.

ProsCons
  • Multiple fuel options
  • Initial purchase is affordable
  • Simple design is easy to repair or replace
  • Wasted energy due to standby heating
  • Storage tank can be large/bulky
  • Lifespan shorter than tankless heaters

Fuel Type and Energy Efficiency

Conventional water heaters are most often fueled by natural gas or electricity. Models that utilize natural gas are less expensive to operate. LP and oil-fueled models are also available. Conventional models must meet the new EF (Energy Factor) standard of .62 or above, depending on the tank size and fuel source.

On Demand/Tankless Water Heaters in Hardin County

In a tankless unit, water is heated by electric coils or a gas burner as it moves through the heat exchanger.

ProsCons
  • Small size gives more installation options
  • Can last up to twice as long as a conventional model
  • Less wasted energy, only heating minimum amount of water necessary
  • Difficult to heat water for 3+ taps at once
  • Initial investment is higher than conventional models

Fuel Type and Energy Efficiency

Tankless models, like their traditional counterpart, can be fueled by natural gas, LP gas, oil, or electric. These models have an EF standard of .82 or greater.

Solar Water Heater

Using the sun’s natural rays absorbed by roof mounted panels as a power source, solar water heaters in Hardin County are the most environmentally friendly option available. Electricity from the power grid acts as a back-up so you never go without hot water.

solar water heater diagram
ProsCons
  • Free to operate, weather permitting
  • Gas or electric is used less often to heat water (backup only), resulting in lower bills
  • Most expensive upfront costs
  • Repairs and maintenance for “extra” parts could be costly

Fuel Type and Energy Efficiency

The SEF (Solar Energy Factor) standard is equal to or greater than 1.2 for a natural gas backup unit, 1.8 for an electric backup unit.

Coil Space Heater/Water Heater Combinations

Combination units use the heat produced by the home’s space heating system and a heat exchanger to produce hot water. Hot water is stored in a tank until there is a call from the tap.

ProsCons
    High efficiency units could lower monthly bills Multiple fuel options
  • Installation is lengthier/more complicated
  • Retrofitting could be costly

Fuel Type and Energy Efficiency

Working in combination with your home’s heating space heating source, both units utilize the same fuel. The EF standards are similar to traditional tank units; however, because most combination heaters are high-efficiency they will likely exceed the rated EF standards.

How To Get the Best Water Heater Contractor in Lumberton, Silsbee and Village Mills

When your home has no hot water, your instinct is to work with the contractor who can get to you the fastest. However, taking just a few minutes to find the pro who asks questions, listens to your answers and educates you on your options will save time, money and headaches.

corroded water heater

You Ask We Answer

How Often Do I Need Service?

Regular inspections and annual flushing can prevent sudden, costly repairs.

It is Making a Lot of Noise But is Still Functioning, Do I Need to Worry Right Now?

This is usually an indication of sediment in the water tank. While you may still have hot water, it is not running as efficiently as it could. Having the tank drained and serviced will improve efficiency and could extend the life of your heater.

Does a Leaking Water Heater Have to be Replaced?

Yes, in most cases a leaking tank means cannot be patched. If a loose fitting is causing the leak however, it might be repairable.

How Long Will My Water Heater Last?

Depending on the model, most will last between 6 and 15 years, though 20 years is not uncommon with regular maintenance and parts replacement.

What Does the Warranty Cover?

This varies by manufacturer, but typically the warranty includes all parts and labor to repair or replace defective parts for the first full year from the date of installation. After the first year, the warranty usually provides coverage for the replacement of defective parts, but does not pay for the labor associated with installing the parts.

Are You Insured?

Liability insurance and workers’ compensation policies protect you from financial obligations stemming from damages or injuries that may occur while a contractor is working on your project. Ask the contractor for a certificate of insurance with you listed as the additional insured (your contractor can obtain this from the insurance agency at no additional cost).

Is a Permit Required For a New Installation?

Yes you need a permit to ensure installation is up to the municipality’s building codes. Aptera installation experts will explain the permit process and obtain the proper permit for you.

Tips for Reducing Your Water Heating Costs

Monthly heating costs can vary greatly depending on the age and model of your water heater, the fuel source used and the amount of hot water you use each day. Reduce waste and your costs by following the guidelines below:

For more details on energy efficiency requirements go to the US Department of Energy www1.eere.energy.gov/buildings/appliance_standards or the PHCC.

Hardin County Cities Served

Water Heaters Lumberton, TX

Lumberton Water Heaters Costs:

Lumberton water heater installation costs $1,124, water heater repair costs $658.

Water Heaters Silsbee, TX

Silsbee Water Heaters Costs:

Silsbee water heater installation costs $1,005, water heater repair costs $588.

Water Heaters Village Mills, TX

Village Mills Water Heaters Costs:

Village Mills water heater installation costs $926, water heater repair costs $542.

Water Heaters Kountze, TX

Kountze Water Heaters Costs:

Kountze water heater installation costs $1,108, water heater repair costs $649.

Water Heaters Sour Lake, TX

Sour Lake Water Heaters Costs:

Sour Lake water heater installation costs $957, water heater repair costs $560.

Water Heaters Batson, TX

Batson Water Heaters Costs:

Batson water heater installation costs $989, water heater repair costs $579.

Water Heaters Saratoga, TX

Saratoga Water Heaters Costs:

Saratoga water heater installation costs $983, water heater repair costs $576.

Water Heaters Votaw, TX

Votaw Water Heaters Costs:

Votaw water heater installation costs $916, water heater repair costs $536.

Water Heaters Thicket, TX

Thicket Water Heaters Costs:

Thicket water heater installation costs $1,088, water heater repair costs $637.

77374 | 77376 | 77519 | 77585 | 77625 | 77656 | 77657 | 77659 | 77663 |

Water Heater Installation in Hardin County, TX

Water Heater Installation Hardin County, TX

Water Heater Repair in Hardin County, TX

Water Heater Repair Hardin County, TX

Tankless Water Heater Installation in Hardin County, TX

Tankless Water Heater Installation Hardin County, TX

Get Pricing on Water Heaters in Hardin County, TX

Hardin County Water Heater Installation

Water Heater Installation in Hardin County

Average Cost: $1,110
Starting At: $553

Show Less

CityAvg. CostLow CostHigh Cost
Batson $989$560$1,596
Kountze $1,108$530$1,585
Lumberton $1,124$548$1,570
Saratoga $983$580$1,605
Silsbee $1,005$459$1,474
Sour Lake $957$567$1,655
Thicket $1,088$562$1,783
Village Mills $926$512$1,467
Votaw $916$533$1,364
Hardin County Water Heater Repair

Water Heater Repair in Hardin County

Average Cost: $650
Starting At: $152

Show Less

CityAvg. CostLow CostHigh Cost
Batson $579$154$1,185
Kountze $649$146$1,178
Lumberton $658$151$1,166
Saratoga $576$159$1,192
Silsbee $588$126$1,095
Sour Lake $560$156$1,229
Thicket $637$154$1,324
Village Mills $542$141$1,090
Votaw $536$146$1,013
Hardin County Tankless Water Heater Installation

Tankless Water Heater Installation in Hardin County

Average Cost: $1,312
Starting At: $322

Show Less

CityAvg. CostLow CostHigh Cost
Batson $1,169$327$3,004
Kountze $1,309$309$2,985
Lumberton $1,329$320$2,955
Saratoga $1,163$338$3,021
Silsbee $1,188$267$2,775
Sour Lake $1,131$331$3,115
Thicket $1,287$328$3,356
Village Mills $1,095$299$2,761
Votaw $1,082$310$2,567
Hardin County Solar Water Heater Installation

Solar Water Heater Installation in Hardin County

Average Cost: $1,353
Starting At: $327

Show Less

CityAvg. CostLow CostHigh Cost
Batson $1,206$331$3,391
Kountze $1,351$313$3,369
Lumberton $1,371$324$3,336
Saratoga $1,199$342$3,411
Silsbee $1,225$271$3,133
Sour Lake $1,166$335$3,516
Thicket $1,327$332$3,789
Village Mills $1,129$303$3,117
Votaw $1,116$315$2,898